Ödeme & teslimat koşulları:
|Specification:||2440*1220, 1200*600, 600*600 mm||Type:||square, small bevel, big bevel|
|Material:||Fiberglass panel||Surface:||Fabric, PU, genuine leather|
|Thickness:||25 mm, 50 mm||Application:||Studio room,cinema|
The fiberglass fabric acoustic panel has various finish color to choose, and it is also available for
customer to provide the finish.
It has good decoration, easy to install and no dustproof etc. various advantages
Basic material: 96kg/m3 Owens Corning.
Frame: Retardant resin frame wooden frame aluminum frame
Finished: Fabric Series and Leather Series
|Material||Fiberglass panel with resin-hardened edges|
|Environmental Influence||Fully recycled|
Raw Material: Class A
Facing fabric can be custom-ordered
|Humidity||Max90% R/H at 40ºC|
|Durability||5 years without sagging or delaminating|
|Clean-ability||Clean with vacuum, soft brush to remove residue|
The fiberglass fabric acoustic panel is made from fire retardant special acoustic cotton inside
with resin frame, wood frame or aluminum frame around and wrapped with fire retardant fabric,
leather or real leather outside.
The fire retardant grade can reach GB8624 2006 Grade C(Same as 8624 2012 Grade B1)requirement
Our acoustic fabric panel is made from high quality Owens Corning fiber glass acoustic cotton, it has
environmental protection, fire retardant, wide range sound frequency absorption etc. various
The various colors and finish choices can satisfy all the customer’s acoustic and decoration
For the need of our customer, we have almost all the necessary documents for export and import,
such as fire retardan report, environmental report, sound absorbing report and SGS testing report etc.
Flame Retardant Characteristic:
Acoustic absorption is usually defined in terms of an absorption coefficient(usually denoted by the
Greek letter alpha, α), defined as the ratio of absorbed to incident sound energy from a single interaction
between a sound wave and a certain material.
Absorption coefficients range from 0 to 1 and vary with frequency,
α=0 means that the material absorbs no sound and reflects all sound energy incident on it.
α=1 means that the material absorbs all sound energy incident on it and reflects none.
Absorption coefficients of 0 and 1are ideal values that do not exist in reality because all materials
reflect and absorb some sound.
In general, materials having absorption coefficients less than 0.15 are considered to be
reflective and those having absorption coefficients greater than 0.4 are considered to be absorptive.
As you can see our Testing report show that our products have a very good performance in a large
range of application.
|Remaining length of burn/mm||GB/T 8625-2005||480||Qualified|
|Average /mm||GB/T 8625-2005||577||Qualified|
|Average temperature of smoke/ºC||GB/T 8625-2005||89||Qualified|
|Flame height/mm||GB/T 8626-2007||25||Qualified|
|Smoke Level||GB/T 8627-2007||48||Qualified|
İlgili kişi: Fay Huang